What’s the best way to get dog hair out of carpet? Here’s What to Expect

Use Baking Soda To Get Dog Hair Out Of Your Carpet

Baking soda has so many uses other than baking!

Not only does baking soda work as a great way to neutralize bad pet odor but it also helps to loosen up pet hair and debris from the carpet.

To try the baking soda method, simply sprinkle a light coating of baking soda on your carpet.

Let it sit for about 10-15 minutes, and then vacuum.

8 Easy Ways To Remove Dog Hair From Your Carpet

Besides using a good vacuum cleaner to get dog hair out of your carpet, here are other pet hair-removing techniques you can use to lift the most hair.

Carpet rakes are my favorite ways to get dog hair out of my whole carpet and they require the least amount of work.

These rakes look like a broom but the rubber bristles easily remove even the toughest dog hair that is embedded deep into the carpet.

This rubber broom has long handles that make them easy to use in larger areas.

For the best results, it’s recommended to use a carpet rake before you vacuum the carpet.

Lint rollers are a must-have pet hair remover tool for pet parents and boy, have they come a long way since I was a kid!

Lint rollers come in all shapes and sizes now and they even have rollers that have long handles!

The long handles really make these lint rollers versatile for use in all areas of your home including on curtains, carpets and rugs.

I love the Evercare lint rollers but ScotchBrite makes a good one too!

Alternatively, if you don’t have a sticky lint roller on hand, you can use sticky tape like packing tape or duct tape.

A rubber squeegee is another easy way that a dog owner can remove stubborn dog hair from carpets and rugs.

The rubber part of the squeegee acts like a hair magnet and really lifts the dog and cat hair out of the carpet.

You don’t have to wet the rubber squeegees, just use them dry and run across the carpet using moderate pressure.

Remove the excess hair as needed.

The dog brush that you use to remove loose pet hair from your dog can also remove loose fur from your carpet too!

You’ll want to use a brush that has metal pins or stiff metal bristles for the best results.

I like using my Chris Christensen pin brush and also a good dog rake.

When using a dog brush to remove pet hair from the carpet you’ll want to make sure that you pick a center focal point to brush all the loose hair towards.

You’ll want to frequently remove the hair from the brush as you go.

The 9 Ways to Remove Pet Hair from Your Carpet

The best part about cleaning a carpet full of pet hair is that you don’t always require special detergents and solvents to get the work done. With just a few ingredients and this list of tried-and-true pet hair removal tools, you can have an easier time getting fur, whether short or long, out of your carpet.

Lint rollers are the must-have tools for picking up cat and dog hair from the carpets. Whether it’s a routine cleaning day or the dreadful shedding season, lint rollers will get the job done.

One of the best lint rollers you can use is the ChomChom Roller Pet Hair Remover. This inexpensive tool has sheets that peel off in layers, exposing a new sticky sheet for each use.

When the lint roller is no longer sticky, unwrap the sheet, toss it and use a new one. Roll and remove the sheet when full until the dirt is out.

Do you want a chemical-free way to clean your carpet? Rubber gloves offer a way out of the expensive carpet cleaners on the market. Also, a latex glove, just like the typical rubber gloves found in the cleaning aisle, can work on your carpet – no additional cleaning supplies are needed.

Rubber glove creates static power that helps the fur on the carpet stick on the glove on the hand.

Here is how to use rubber gloves for carpet pet hair removal:

Put on the rubber glove, and be prepared to get frisky with your carpet as you rub your hands all over the rug. The friction between the hand and the carpet will create static energy that will lift the fur and lint pieces and stick to the glove.

Before rubbing the carpet, submerge your hands in water and then proceed to give your carpet a good rub down. The damp glove will lift the hair from the carpet and cause it to stick on it. However, ensure that you rub in one direction to help collect a lump of hair at a common spot.

Collect the gathered hair and dispose of it elsewhere and rinse off the gloves by plunging the hand in a basin with hot water. The hair will unstick from the gloves and float away. Repeat the process until the rest of the hair is out of the carpet.

Yes, it doesn’t always have to be the expensive cleaning detergents. All you need is a regular fabric softener you use for your laundry, water, a spray bottle, vacuum, or brush. Here is the procedure you can follow.

Create a solution of liquid fabric softener and water. Dilute the fabric softener and the water in a spray bottle.

Spray the carpet lightly with the solution. Be careful not to spray too much; a bit of the solution on the fabric will do.

Wait for a couple of minutes for the solution to dry. It shouldn’t take long if you’ve sprayed a light mist.

The fabric softener allows stubborn pet hair to loosen up such that you can easily vacuum or brush the fur out of the fabric.

This broom-like tool works like a charm on the carpet by combing through it, unearthing the most hidden pet fur. It also has a long handle, removing the need for going down on your knees when cleaning.

The tiny metal or plastic pins at the rake’s head dig deep in the carpet’s fibers, pulling and trapping the hair from the rug with each stroke. Here is how to use a carpet rake:

Ensure the head is clean and adjusted to the handle.

Secure the handle to a comfortable height of operation.

Press the head onto the rug and rug and apply light pressure as you pull it down the fabric using short strokes. You can use longer strokes as you pull upwards if the carpet has long fibers.

Clean a small area and move onto the next spot once you feel the fur is out.

Remove the build-up from the rake and dispose of it once the head is full of hair.

A hairbrush is a handy tool when retrieving the hard-to-get strands of pet hair from a carpet. Ensure that you use a brush with stiff metal bristles when brushing.

When brushing, you can use both short and long strokes in various directions to ensure you are getting deep into the carpet’s fabric. However, ensure that all the strokes lead towards you and to a common collection point where you can hand-pick the pet hair lumps that form.

The fur will periodically stick and clog the bristles on your brush. Therefore, you may need to regularly stop and pull out the hair strands before you continue brushing. Brush repeatedly until no more hair sticks on the brush.

Tired of cat hair sticking to all of your clothes and furniture?

Well, weve got a little secret to share, want to know how we keep shedding to a minimum? The Hepper Cat Brush! Created to be gentle on your cat’s skin while removing excess hair, this brush is perfect for weekly grooming sessions. Click here if you’re ready to put down the lint roller. At Pet Keen, we’ve admired Hepper for many years and decided to take a controlling ownership interest so that we could benefit from the outstanding designs of this cool cat company!

Yes, you are right. You can squeegee a carpet the same way you do a window. Squeegeeing a rug is a charm for extracting tons of stubborn pet hair from it because the rubber part is a hair magnet.

The friction between rubber and the rug’s fabric creates a magnetic effect that pulls and sticks hair onto the tool. Ensure that you use a long-handle brush squeegee when cleaning a carpet to avoid bending your back or kneeling. Now, you only have to bring the window technique down to your floor.

Here is how to use a squeegee:

Pull the squeegee along the carpet towards your direction with a little pressure. Ensure that you do it in sections. Although it might require effort, it is worth the trouble. The rubber will pull out tumbleweed-like balls of fur, freeing the fabric from pet hair.

The rubber will loosen the embedded hair, allowing you to pick up and dispose of the hair clumps that accumulate after few strokes. Repeat the process until you get rid of all the pet hair.

You can use a vacuum cleaner to suck up the hair rolls or stubborn fur out of the carpet.

Unlike other far-fetched pet hair removal tools, you can easily find baking soda in your kitchen. All you need is a packet of baking soda and a vacuum cleaner.

Start by spread a light coating of baking soda all over your carpet and allow it to sit for a few minutes. Now get the hair strands out by vacuuming the rug thoroughly. Baking soda not only helps loosen pet hair from the rug’s fabric it also deodorizes the carpet.

Or try using baking soda followed by a great enzyme cleaner.

Our favorite enzyme cleaner is the Hepper Advanced Bio-Enzyme Pet Stain & Odor Eliminator Spray because it permanently removes even the very worst pet stains and smells you can imagine (and makes clean-up a breeze). They even offer a 100% satisfaction guarantee! Click here to order a bottle and freshen up your home today.

At Pet Keen, we’ve admired Hepper for many years, and decided to take a controlling ownership interest so that we could benefit from the outstanding products of this cool cat company!

How to remove dog hair from carpet

Using baking soda is an extremely effective way to remove unwanted dog hair from your carpet and furniture. If you don’t have any on hand, your first set is to gather some baking soda and your vacuum. Apply the baking soda liberally to the target area of your couch or carpet and allow it to sit for a few minutes. After that, all you need to do is vacuum the area thoroughly. One great thing about baking soda is that it will also leave your house smelling great!